|
Title: |
CB&Q 2-8-0 Class D-4-A 1919 |
Description: |
Chicago Burlington & Quincy Railroad 2-8-0 Class D-4-A 1919 at Schenectady, New York sometime in 1903, photographer unknown, print scanned from Louis Zadnichek collection. Number 1919 was built by the Schenectady Works of Alco in 1903 ( c/n 27733 ), renumbered to 3174 in 1904, and retired in November 1929. |
Photo Date: |
1/1/1903 Upload Date: 4/27/2020 10:53:13 AM |
Location: |
Schenectady, NY |
Author: |
American Locomotive Company |
Categories: |
Steam |
Locomotives: |
CBQ 1919(2-8-0) |
Views: |
280 Comments: 0 |
|
|
|
Title: |
CB&Q 2-8-0 Class D-4-A 1919 |
Description: |
Chicago Burlington & Quincy Railroad 2-8-0 Class D-4-A 1919, unknown location but likely Schenectady, New York, September 1903, photo by the Schenectady Works of the American Locomotive Company, Chuck Zeiler collection. Built in September 1903 by the Schenectady Works of Alco as #1919 (c/n 27733), it was renumbered in 1904 to #3174. In 1902 the Burlington placed an order for 100 2-8-0 type locomotives, 75 to be built by Alco, and 25 by Baldwin. These were the heaviest locomotives on the Burlington at the time, the Alco's weighing 201,000 pounds, and the Baldwin's weighing 199,540 pounds. They featured a straight top boiler, a large radial stayed firebox completely above the rear drivers with a 54 square foot grate area, fired through two separate doors on a sloping backhead. Working pressure was 200 psi. The driver diameter was 57 inches, the cylinders measured 22 X 28 inches with 12 inch piston valves actuated by Stephenson motion. Note the piston rod extension next to the pilot truck providing front bearing support. Most, if not all, of the piston rod extensions were later removed. This particular locomotive was retired in November 1929. |
Photo Date: |
9/1/1903 Upload Date: 4/19/2010 12:32:22 PM |
Location: |
Schenectady, NY |
Author: |
American Locomotive Company |
Categories: |
Roster,Steam |
Locomotives: |
CBQ 1919(2-8-0) |
Views: |
1756 Comments: 1 |
|
|
|